3 receiving, Contents and packaging, Tool requirements – Yaskawa 1000 Series Drive Option - CANopen Installation User Manual
Page 9: 3receiving
YASKAWA ELECTRIC TOBP C730600 45B 1000-Series Option SI-S3 Installation Manual
9
3 Receiving
3
Receiving
Please perform the following tasks after receiving the CANopen Option:
• Inspect the CANopen Option for damage.
If the CANopen Option appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the PCB (see
• If you have received the wrong model or the CANopen Option does not function properly,
contact your supplier.
◆
Contents and Packaging
Table 1 Contents of Package
◆
Tool Requirements
A Phillips screwdriver PH1(#1) or PH2(#2) is required to install the CANopen option card.
Note: Tools required to prepare CANopen cables for wiring are not listed in this manual.
Description:
Option Card
Ground
Wire
Screws
(M3)
LED Label
Installation
Manual
Quantity:
1
1
3
1
1
ERR
RUN
MANUAL