Yaskawa EtherNet/IP - Manual (Page 46)

13 Specifications
Table 11 Option Specifications
Item Specification
Model SI-EN3D
Supported Messages
Explicit: Explicit Class 3, Unconnected
I/O: Class 1, Listen Only, Input Only
I/O Assembly Instance
Input: 8 types (4 to 44 Bytes)
Output: 8 types (4 to 44 Bytes)
SI-EN3D Specification Composite Test Revision: CT11 Passed
SI-EN3D Profile AC Drive
Connector Type RJ45 8-pin Straight Connector STP Cat5e cable
Physical Layer Type
Isolated Physical Layer
TCP Protocol Transformer Isolated
IP Address Setting Programmable from drive keypad or network
Communication Speed
Programmable from drive keypad or network:
10/100 Mbps, auto-negotiate
Number of Connections
I/O: 2
Explicit: 6
Duplex Mode Half-forced, Auto-negotiate, Full-forced
Address Startup Mode Static, BOOTP, DHCP
Ambient Temperature -10 °C to +50 °C (14 °F to 122 °F)
Humidity 95% RH or lower with no condensation
Storage Temperature -20 °C to +60 °C (-4 °F to +140 °F) allowed for short-term transport of the product
Area of Use Indoor (free of corrosive gas, airborne particles, etc.)
Altitude 1000 m (3280 ft.) or lower
13 Specifications
46 YASKAWA TOEP YAICOM 16A 1000-Series Option Dual-Port EtherNet/IP SI-EN3D Installation Manual