Yaskawa PG-E3 Motor Encoder Feedback - Manual (Page 30)

7 Troubleshooting
YASKAWA ELECTRIC TOBP C730600 52C 1000-Series Option PG-E3 Installation Manual 29
Table 8 Operation Error Displays, Causes, and Possible Solutions
Digital Operator Display Fault Name
oPE02
Parameter Range Setting Error
Use U1-18 to find parameters set outside range.
Cause Possible Solution
Parameters were set outside the
possible range.
Set parameters to the proper values.
Note: When multiple errors occur at the same time, other errors
are given precedence over oPE02.
Digital Operator Display Fault Name
oPE06
Control Method Selection Error
Correct the setting for the control method.
Cause Possible Solution
Control mode requires installing
a PG option, but no PG option is
installed (A1-02 = 7).
• Connect a PG option.
• Correct the value set to A1-02.