Yaskawa V1000 Option DeviceNet - Manual (Page 21)

5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 28B V1000 Option DeviceNet Installation Manual 21
Figure 2.7
Figure 8 Ground Cable
Note: Cover removal for certain larger models with a Terminal Cover:
-Single-Phase 200 V Class: CIMR-V BA0006 to BA0018
-Three-Phase 200 V Class: CIMR-V 2A0008 to 2A0069
-Three-Phase 400 V Class: All models
Remove the terminal cover before removing the bottom cover to install the DeviceNet Option.
Replace the terminal cover after wiring the DeviceNet Option.
Figure 2.8
Figure 9 Models with Terminal Cover
4.
Reattach the bottom cover.
5.
Connect the DeviceNet Option to the drive. Properly secure the tabs on the left and
right sides of the DeviceNet Option to the drive case.
Figure 2.9
Figure 10 Attach DeviceNet Option
A – Option unit connection: screw size = M3
B – Drive-side connection: screw size = M3.5 to M6
A
B
Tabs should line up
Tabs should line up