5 installation procedure – Yaskawa V1000 Option DeviceNet User Manual
Page 22

5 Installation Procedure
22 YASKAWA
ELECTRIC
TOBP C730600 28B V1000 Option DeviceNet Installation Manual
6.
Connect the ground cable from the drive ground terminal to the DeviceNet Option
ground. When wiring the DeviceNet Option, pass the ground cable through the
inside of the drive
bottom cover, then pass the ground cable into the through-hole at
the front of the DeviceNet Option.
Figure 11 Ground Cable Connection
7.
Connect the communications cable to the terminal block. Refer to Procedure on
page
8.
Attach the DeviceNet Option cover to the front of the DeviceNet Option.
Figure 2.10
Figure 12 Attach Cover
Note: When using the drive in an area that may require displaying warning information in Japanese or
Chinese, a label is provided with the DeviceNet Option. This label can be placed over the
English and French warnings on the front of the DeviceNet Option.
Ground
cable
Drive ground
terminal
Pass the ground
cable through
the bottom cover
of the drive.
Through-hole
for ground cable
Ground cable
Tabs should line up