Hongdian H8922 Dual SIM Single Module - Manual (Page 69)

H8922 3G/4G Router 5 Router config
Version (2014-05-28) 5 -33
Figure 5-38 To add timing task
Step 4 Configure timing task parameter.
Table 5-17 Timing task parameter instruction
Parameter Details Operation
Status To enable or disable a timing
task. Some task shall be
enabled together with NTP options

Enable
 Disable
Basic Config
Task name Name of a timing task Max 12 digits
Task type Task type has action task and
status task. Action task is for
time point or time interval,
while status task is for time
period (for “modem-online”
and “modem2-online”), which
means that the modem will be
online (if down, modem will
automatically redial) during
the configured time period.
Modem will be offline (no Drop DownList options:
 modem-online

modem2-online
 reboot
 custom
if select “custom”, “schedule” will be
shown to input command (can be
dialup or other command). Max 64
bytes