iSys iTerra TL1290 Color LED Printer User Manual
Page 17
Advertising
15
STEP 5
STEP 6
Gently pull the paper downwards and feed the paper
underneath the orange roller.
Open the Plexiglas paper loading door , and remove the
top piece of fanfold paper at the perforation, place the
paper three quarters of the way up the path so that the
paper has covered the paper sensors completely. Close
the red guides on the each side of the paper and close the
bottom guide. Close the Plexiglas paper loading door.
STEP 7
STEP 8
Take up the tension on the paper by gently pulling it
downwards. Ensure that the paper tension is even on
both sides. Be careful not to pull the paper out
completely.
While taking up the tension on the paper close the guide.
Advertising