iSys iTerra TL1290 Color LED Printer User Manual
Page 20
18
Adjustments
TOF Sensor – allows you to adjust the sensor when troubleshooting. Your printer has been configured at the factory to sense low
black density I-marks, so adjustment is not normally required. If you feel you need to make adjustments to the sensor, please
contact an iSys certified technician and you will be walked through the process.
CAUTION:
Careful consideration must be taken when you are to make these changes.
Control Panel
LCD Contrast – Allows you to select from 1 – 8 the contrast of the lighting on your display. Different environmental operating
conditions may require this setting to be adjusted.
Sound Options – Allows you to set your error sounds by time (30 sec, 5 sec, or Off). When sound audible is active, press any front
panel key and beeping will stop.
Firmware Upgrade
This allows you to upload a firmware file, provided by iSys - The Imaging Systems Group Inc., from your host computer. (Options
are Upload File – Yes/No)
Instructions and new firmware will be posted on the website: www.isys-group.com. You will normally be notified by iSys - The
Imaging Systems Group Inc. if updating is required.