iSys iTerra TL1290 Color LED Printer - Manual (Page 8)

6
STEP 6 STEP 7
Remove colored image drum packing pieces. Remove tape
STEP 8
STEP 9
Remove protective sheet 1. Remove colored locks (b).
2. Remove tape then remove colored seals (a).
NOTE: Be sure all tape is removed from image drum
cartridges.
STEP 10
STEP 11
1. Shake toner cartridge from side to side to distribute
toner (a).
2. Remove sealing tape from toner cartridge bottom (b). Align the notch on the end of the toner cartridge with the
tab (a) in the image drum, and then lower the toner
cartridge into the image drum. Press down to make sure
it is seated correctly.