LeMond g-force RT - Manual (Page 17)

17
3 ASSEMBLY AND INSTALLATION INSTRUCTIONS
Connecting the Wiring for the Contact Heart Rate Grips
Once the seat assembly has been at-
tached to the seat carrier, connect the two
wires on the handlebars to their corre-
sponding wires on the seat carrier.
The connection on each of the two wires
is different. There is only one correct way
to make the connection. Do not try to
force the connection.
3.5.6 Pedals
Note: All bicycle pedals have a designated
left and right. Your pedals are marked as
such on the pedal itself.
Left and right orientation on the bike is
determined as the position you would be in while riding the bike. It is important that you attach each
pedal to the corresponding crank, as the threads on the left pedal and crank are reversed. Left pedals
are always reverse-threaded so that the pedal tightens rather than loosens while you are pedaling the
bike.
CAUTION: Attempting to install the pedals on the incorrect side will cause damage to both
the pedal and the crank.