Casio XW-G1 - Manual (Page 76)

Using the Performance Mode
E-74
DSP Line DSP line. This setting is the same as the mixer function part DSP line (page E-80). Off, On
Knob1Enable Knob 1 on/off. Enables/disables 3 K1 operation for each zone. Off, On
Knob2Enable Knob 2 on/off. Enables/disables
3
K2 operation for each zone. Off, On
Knob3Enable Knob 3 on/off. Enables/disables
3
K3 operation for each zone. Off, On
Knob4Enable Knob 4 on/off. Enables/disables
3
K4 operation for each zone. Off, On
Bend Enable Bender on/off. Enables/disables
bt
BENDER operation for each zone. Off, On
Wheel Enable Modulation wheel on/off. Enables/disables
bt
MODULATION operation for each zone. Off, On
Pedal Enable
Pedal on/off. Enables/disables operation of a pedal plugged in to the cl SUSTAIN/
ASSIGNABLE JACK for each Zone.
Off, On
Arp Enable Arpeggio on/off. Enables/disables arpeggio function (page E-40) for each zone. Off, On
Phrase Enable Phrase on/off. Enables/disables the Phrase Sequencer (page E-45) for each zone. Off, On
Controller >Ent Controller parameters. This is group of editable parameters for controller.
K1
Knob Target 1. Selects the parameter controlled by
3
K1 knob operation. For example, if
“CC67:Soft” is specified for this setting, 3 K1 operation will apply a soft pedal effect.
CC00 to CC97: MIDI control change * 1
NRPN, RPN: MIDI NRPN and RPN parameters * 1 * 2
Ch Pressure: MIDI channel pressure * 1
Arpeggio: Preset arpeggio type (page E-40)
Tempo: Tempo setting (page E-46)
EQ Low Gain - EQ High Gain: Master EQ >Low Gain - High Gain (page E-38)
*1 For details about each setting, refer to the MIDI Implementation document
(http://world.casio.com/) and other MIDI documentation.
*2 After selecting these parameters, press br
ENTER again and then adjust the items below.
MSB: 63H for NRPN, 65H for RPN (Setting range: 000 to 127)
LSB: 62H for NRPN, 64H for RPN (Setting range: 000 to 127)
Send Data: Specifies whether knob operation controls MSB or LSB. (Settings: MSB, LSB)
Refer to the cell to
the left.
K2 to K4
Knob Target 2 to Knob Target 4. As with K1 (Knob Target 1), Selects the parameter controlled
by
3 K2 to K4 knob operation.
Same as K1.
Pedal
Pedal. Specifies the function of the pedal plugged in to cl SUSTAIN/ASSIGNABLE JACK.
Hold: Pressing the pedal sustains notes. This is a sustain effect.
Soft: Pressing the pedal slightly lowers the volume of notes.
Sostenuto (Sostenut): Pressing the pedal while keyboard keys are depressed sustains (holds)
only the notes of the pressed keyboard keys.
Step Sequencer Play/Stop (SSEQ P/S): Pressing the pedal starts or stops Step Sequencer
sequence playback.
Phrase Sequencer Play/Stop (Phrase P/S): Pressing the pedal starts or stops Phrase
Sequencer phrase playback.
Phrase Record (Phrase REC): Same function as the Phrase Sequencer
bo REC button.
Sample Looper Play/Stop (Lper P/S): Pressing the pedal starts or stops sample looper sample
playback.
Sample Looper Record (Lper Rec): Same function as the sample looper
bm REC button.
Refer to the cell to
the left.
Touch
Touch. Specifies touch sensitivity when the keyboard is played.
Off (Off): Notes sound at a fixed volume level regardless of keyboard pressure.
Normal
Light: High-volume notes are easily produced even with light keyboard pressure.
Refer to the cell to
the left.
TchOffVel Touch off velocity. Specifies the volume level when the above touch curve setting values are off. 0 to 127
Sequencers >Ent
Sequencers parameter. This group includes Step Sequencer (page E-50), Phrase Sequencer
(page E-45), and Arpeggio function (page E-40).
Tempo
Tempo. Adjusts the Phrase Sequencer and Step Sequencer playback tempo. You also can
change the playback tempo using
8 TEMPO.
30 to 255
Step SEQ Number Step sequencer number. Specifies the Step Sequencer sequence (page E-52). Preset00 to User99
Solo1 Ch
Step Sequencer solo track part. Step Sequencer Solo Track 1 is normally Part 14, but it can be
changed to Part 1 (Zone Part 1, page E-55).
1, 14
Change
Step Sequencer change timing. Specifies the switching timing when a pattern is changed by the
Step Sequencer (page E-56).
Wait, Real, Beat
Display Description Settings