Casio YC-430 - Manual (Page 121)

121
Operation Bar Properties
You can configure operation bar properties and specify its display location and other attributes.
Use the following procedure to configure operation bar properties.
1.
Select [Operation Bar Properties] on the [Tools] menu.
z This displays the operation bar properties dialog box.
2.
Configure the settings on the dialog box.
z For more information, see “Operation Bar Properties” (page 122).
3.
After configuring the settings you want, click the [OK] button.
z This closes the dialog box and applies the settings you changed.
z To exit the dialog box without applying your settings, click the [Cancel] button instead of
[OK].
Configuring Operation Bar Properties