Casio YC-430 - Manual (Page 40)

40
Using the PJ System Like an OHP Projector (Document Camera Mode)
9.
To scroll back to a previously projected image, select [Back] on the
[View] menu.
z To scroll forward through images, select [Forward] on the [View] menu.
z For details about other operations you can perform while projecting document camera
images, see “Operations Available During Projection in the Document Camera Mode”
(page 44).
10.
To quit manual projection, select [Exit] on the [File] menu.
z This exits PJ Camera Software and turns off the PJ Camera. All buffered images are
deleted at this time.
z In place of step 7 of the above procedure, you could also perform either of the following
operations to trigger the record operation.
• Right-click anywhere on the window and then select [Shutter] from the shortcut menu
that appears.
• Press the [Enter] key on your computer keyboard.
z To switch back to [Auto] after performing a [Manual] operation, repeat steps 1 through 4
of the above operation, and then click [Auto] so it is turned on ( ).
z You can zoom and rotate a projected document camera image while it is being projected,
and save the result as an image file for later use. For details about such operations, see
“Operations Available During Projection in the Document Camera Mode” (page 44).
[Back]
[Forward]