GoPro Hero 5 Session - Manual (Page 11)

20 21
CAPTURING TIME LAPSE CONTENT
In Time Lapse mode, HERO5 Session has three capture modes:
Time Lapse Photo: Captures a series of photos at specified
intervals. Use this mode to capture photos of any activity, then
choose the best ones later.
Night Lapse Photo: Captures a series of photos at set intervals
when the lighting is dark. The shutter remains open longer to let
in more light in dark environments.
Time Lapse Video: Creates video from frames captured at
specific intervals. Time Lapse Video is available only in 4K, 2.7K
4:3, and 1080p resolutions and is captured without audio
CAPTURING TIME LAPSE CONTENT
The fastest way to capture time lapse content in the capture mode that
you used last time is to use
QuikCapture (page 11). But if you want to
change the time lapse capture mode or settings, follow the steps below.
1. Press the Menu button to turn on the status screen.
2. Select a capture mode (Time Lapse Photos, Night Lapse, or Time
Lapse Video) and settings:
a. Press the Menu button repeatedly to move to Camera Settings,
then press the Shutter button [ ] to select it.
b. Press the Shutter button repeatedly until you get to the Time
Lapse icon [ ].
c. Press the Menu button to move to the next field, then press the
Shutter button repeatedly to select a capture mode.
d. To change a setting, press the Menu button to move to the
setting, then press the Shutter button repeatedly to display the
option that you want.
e. Press the Menu button to move to the check mark, then press the
Shutter button to confirm the selection.
3. Press the Shutter button. Your camera beeps once, then beeps once
for each photo that is captured. The camera status lights blink during
capture.
4. To stop capturing, press the Shutter button.
CAPTURING TIME LAPSE CONTENT