Removing the door, Maintenance, Removing the door maintenance – GoPro Hero 5 Session User Manual

Page 35

Advertising
background image

68

69

In some situations, such as connecting the Karma drone (sold separately),
it might be more convenient to access the ports if the door is removed.

WARNING: Remove the door only when you are using the

camera in a dry, dust-free environment. When the door is open

or removed, the camera is not waterproof.

REMOVING THE SIDE DOOR

When removing the side door, be sure to pull it out in a straight motion, not
at an angle.

REATTACHING THE DOOR

REMOVING THE DOOR

MAINTENANCE

Follow these guidelines to get the best performance from your camera:

• The camera is waterproof to 33’ (10m)—no housing needed. Ensure

that the doors are closed before using the camera in or around water,
dirt, or sand.

• Before closing the doors, be sure the seals are free of debris. If needed,

clean with a cloth.

• Before opening the doors, be sure the camera is free of water or debris.

If needed, rinse the camera with fresh water and dry it with a cloth.

• If sand or debris hardens around the doors, soak the camera in warm

tap water for 15 minutes and then rinse thoroughly to remove the
debris before opening the doors.

• For best audio performance, shake the camera or blow on the mic

to remove water and debris from the microphone holes. To prevent
damage to the internal waterproof membranes, do not use compressed
air to blow into the mic holes.

• After every use in salt water, rinse the camera with fresh water, and dry

with a soft cloth.

• To clean the lens, wipe it with a soft, lint-free cloth. If debris becomes

lodged between the lens and the trim ring, flush it out with water or air.
Do not insert foreign objects around the lens.

Advertising