Kichler 338505 - Manual (Page 3)

2
1. Mount the glass shades to the light fixture
by unscrewing partway the thumbscrews on
the glass holders, inserting the glass, then
gently tightening the thumbscrews by hand
evenly to the glass. DO NOT OVER
TIGHTEN. (Fig. 3)
2. Install 3, 60 watt candelabra bulbs (not
included). (Fig. 3)
3. Restore power only after installation is
completed.
3. INSTALLING THE GLASS SHADES &
LIGHT BULBS
Fig. 2
Fig. 3
4. Raise and hold the light kit assembly close
to the mounting plate. snap together the wire
connection plugs. (Fig. 2)
5. Carefully push all wires back into the
switch housing, then install the light kit
assembly onto the mounting plate with 3
screws provided. Be sure to tighten all
screws. (Fig. 2)
Light kit
assembly
Wire connector
Screws
Mounting plate
Glass
shade
Bulbs
Screws
Light kit
assembly
Sterling Manor
TM
3 Light Fixture