Kichler 337012 - Manual

337012
WARNING
To avoid fire, shock and serious personal injury, follow these instructions:
1. Carefully read and retain this Instruction Manual for future reference.
2. To avoid possible electrical shock, be sure the electricity is turned off at
the main panel by removing the fuse or opening the circuit breaker.
3. This control switch is designed for use with "Ceiling Fans" ONLY. DO
NOT use with any other type of electrical appliance.
4. All wiring must conform to national and local electrical codes. If you feel
you do not have enough electrical knowledge, have a licensed electrician
install the control.
5. The amperage for your fan should not exceed 1.25A.
INSTALLATION AND OPERATING
INSTRUCTIONS
1. Disconnect the power and remove the existing wall plate and switch. (Fig. 1)
2. Push the slide switch all the way down to the OFF position. (Fig.2)
3. Make each of the wire connections illustrated in Figure 3. Secure each
with the wire nuts provided.
In the Ceiling Outlet Box, connect the White (neutral) wire coming from
the Fan to the White (neutral) wire from the Household Supply.
Connect the Black wire from the Switch to the Black wire going to the
Ceiling Fan Motor.
connect the Black wire from the Switch to the Black Household Supply
Wire (AC in L).
4. If your ceiling outlet box has a ground wire (green or bare copper)
connect it to the ground wire from the ceiling fan and/or the ceiling
mounting bracket.
Fig. 2
Fig. 1
Fig. 3
1
4 SPEED WALL CONTROL
INSTALLATION INSTRUCTIONS
Wall plate
Switch
Outlet box
Fan
SUPPLY CIRCUIT
BLACK
BLACK
B
L
A
C
K
B
la
c
k (
A
C i
n L
)
Ground Conductor
Outlet Box
Green Ground Lead
Ground to Downrod
G
R
E
E
N
W
H
IT
E
W
H
IT
E
Black (to motor)
light control lead
Green ground ( )lead
Black (AC IN L)
to hot household