MCZ Flair - Manual (Page 19)

17
5-DRAWINGS AND TECHNICAL FEATURES
Technical Dept. - All rights reserved - Reproduction is prohibited
TECHNICAL CHARACTERISTICS FLAT-FLAIR COMFORT AIR
(Max) nominal output power 8 kw (6880 kcal/h)
Minimum output power 3,2 kw (2752 kcal/h)
Efficiency at Max 87,8%
Efficiency at Min 93,6%
Temperature of exhaust smoke at Max 160°C
Temperature of exhaust smoke at Min 90°C
Particulate/OGC/Nox (13%O
2
) 28 mg/Nm 3 - 27 mg/Nm 3 - 145 mg/Nm 3
CO at 13% O
2
at Min and at Max 0,052 – 0,015%
CO
2
at Min and at Max 6,0% - 9,2%
Recommended draught at Max power*** 0,10 mbar - 10 Pa***
Minimum draw allowed for minimum power 0,0 mbar - 0 Pa
Mass of smoke 7 g/sec
Hopper capacity 30 litri
Type of pellet fuel Pellet diameter 6-8 mm and size 5/30 mm
Pellet hourly consumption Min ~ 0,7 kg/h* - Max ~ 1,8 kg/h*
Autonomy At min ~ 29 h* - At max ~ 11 h*
Heatable volume m 3 172/40 – 197/35 – 229/30 **
Combustion air inlet External diameter 50 mm
Smoke outlet External diameter 80 mm
Air inlet 80 cm 2
Nominal electrical power (EN 60335-1) Max 320 W - Med. 100 W
Supply voltage and frequency 230 Volt / 50 Hz
Net weight 125 kg
Weight with packaging 135 kg
Distance from combustible material (back) 20 mm
Distance from combustible material (side) 200 mm
* Data that may vary depending on the type of pellets used.
**Heatable volume based on the requested power per m3 (respectively 40-35-30 Kcal/h per m 3 ).
*** Value recommended by the manufacturer (non-binding) for the optimal operation of the product
Tested according to EN 14785 in accordance with Directive 89/106/EEC (Construction Products).