Installation and assembly – MCZ Flair User Manual
Page 25
23
6-INSTALLATION AND ASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
CONNECTING THE HOT AIR DUCTING
The standard product has two fans installed for air distribution with the nozzle directed towards the front part of the stove.
Therefore, the first important thing to decide is whether to channel the air or not. In line with this, turn the fan (2) for the air to be released
towards the rear part.
Attention: make sure the plug has been disconnected from the socket before performing any operation.
How to turn the fan.
• Remove the ceramic/serpentine top.
• Remove plate A.
• Remove the two screws “B” that fasten the fan to the structure of the product.
• Pull it slightly out from its seat for it to turn (it does not have to be removed!).
• Turn the whole fan 180°.
• Fasten the fan to the structure once again with the two screws “B”.
• Fasten plate “A”.
• Set the top in place and insert the plug.
CERAMIC OR STEATITE TOP.
PLATE A.