Rose Electronics Vista Remote 2 - Manual (Page 15)

Vista Remote 2 Installation and Operations Manual 9
Hardware
The hardware version level is displayed in this field.
Firmware
The Vista Remote 2 firmware version is displayed in this field
Keyboard Layout
Using the left and right arrow keys, select the keyboard type expected from the host computers.
Admin password
Enter an administrator password of at least six characters that has a mix of letters and
numerals. The background color provides an indication of password suitability. It is initially red
to indicate that the password is not sufficient. When a password with reasonable strength has
been entered it changes to blue.
Unit Name
You can assign a unit name to the Vista Remote 2.
Hot Keys
Use the left and right arrow keys to select a different hot key combination. This hot key
combination is used to invoke the OSD menu and other keyboard commands
Screen saver
Use the left and right arrow keys to set the time for the screen saver to activate.
Time and Date
Set the time and date to the correct values. Use the 24 hour base inputs. All entries in the
activity log are time stamped using this information.
Encryption
Arrange this setting according to your security requirements.
When all items have been updated, click on “Next” to configure the network information. The
network information entered (IP Address, Net Mask, and Gateway) must be compatible with the
network Vista Remote 2 will be connected to.