Time and date configuration – Rose Electronics Vista Remote 2 User Manual
Page 25
Vista Remote 2 Installation and Operations Manual
19
Time and Date Configuration
Figure 14. Time and Date Configuration
Use the left and right arrow keys to select the correct time and date. The time entry uses the 24
hour clock notation. The internal real time clock will continue to run for roughly one week
without power to the Vista Remote 2, after that it will be lost and require resetting. Use the up
and down arrow keys to move between each of the sections within the time and date entries.
If you wish to use an NTP server to obtain the date and time, check the Use NTP box, enter the
NTP Server IP address, and click on “Set Time from NTP Server”.
When all information has been entered, click on the “Save” tab to save the information.