Rose Electronics Vista Remote 2 - Manual (Page 29)

Vista Remote 2 Installation and Operations Manual 23
The first three (3) columns show the date the event occurred.
The next column is the time the event occurred.
The last column describes the type of event with the users name and the access method.
The “Clear log” tab will clear all entries in the log
The “Refresh” tab will refresh the log list
The “Syslog Server IP Address field is an optional field where you can enter an IP address to
send the status log.
The “Save” tab will save the log file
The “Cancel” tab will exit the log menu and return to the main menu
Note: The log has a maximum capacity of 1000 event lines. After 1000 entries, the oldest
entries are overwritten. If log data are important to your installation, ensure a regular backup
procedure or use the Syslog Server IP Address option to send log information automatically to
another system.
To copy and paste the log
You can copy the information listed within the log and paste it into another application. While
viewing the log screen, press Ctrl and C, to copy the data into the clipboard. Start a text
application (i.e. Word, WordPad, Notepad) press Ctrl and V, or right mouse click and ‘Paste’.
This basically covers the configuration of the input module and allows user access to the unit.
Following is the additional KVM switch module configuration. Some configurations are needed
to assure proper functionality and other configurations are optional.