TA Triumph-Adler FAX 940 - Manual (Page 63)

5-2
Operation
Date en cours : 24 mars 2003
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFL-MFC-MFK\MFL 251 259 240A_LU FAX LASER PRO 343SMS_345SMS Sagem
GB\Operation Gb.fm
Caution - If you forget to position the document to be transmitted, the addressee will receive a blank
page.
Remark : Since the addressee’s number is generally on the document to be transmitted, you may also dial before positio-
ning the document.
&
+226,1*

7+(

5(62/87,21

&2175$67
5HVROXWLRQ
You have 4 modes for document transmission.
The mode choice depends on the type of document to be transmitted:
• Normal mode, symbolised by Std at the bottom of the display screen. To be used for good quality
documents, without drawings or small details
• Fine mode, symbolised by Fine at the bottom of the display screen. To be used for documents
with drawings or small characters
• Super Fine mode, symbolised by SFine at the bottom of the display screen. To be used for docu-
ments with very fine or small character drawings
• Photo mode symbolised by Photo at the bottom of the display screen. To be used for photogra-
phic documents
To select the resolution mode:
+
Press key as many times as necessary to select the required mode. A g icon on the screen
shows the current mode.
&RQWUDVW
You can set the contrast if your document is too light or too dark. If the document is light, you must
raise the contrast and if it is dark, you must reduce it.
To set the contrast:
+
Press as many times as necessary to choose the desired contrast, as shown by the position of
a cursor.
'
,$//,1*
)URPWKHGLUHFWRU\
'LDOOLQJDOSKDEHWLFDOO\
+
Enter the first letter of your subscriber’s name with the alphanumeric keypad, then add the
remaining letters until your subscriber’s name is complete.
MFL 251 259 240A_MF34 Sagem Gb.book Page 2 Lundi, 24. mars 2003 2:50 14