TA Triumph-Adler FAX 940 - Manual (Page 73)

5-12
Operation
Date en cours : 24 mars 2003
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFL-MFC-MFK\MFL 251 259 240A_LU FAX LASER PRO 343SMS_345SMS Sagem
GB\Operation Gb.fm
0DUJLQV
If you want to shift the side margins of your document to the left or to the right:
+
Adjust the left / right margins shift (in steps of 0.5 mm) with keys
5
or
6
+
Confirm your setting by pressing key OK
3ULQWHUVHWWLQJV
3DSHU
+
Select the type of paper NORMAL or THICK with keys
5
or
6
+
Confirm your setting by pressing key OK
Remarks : 1) When the THICK type of paper is selected, the printing speed is slowed down.
2) Use the manual feeder for paper substances over 90 g/m
2
.
3DSHUWUD\
+
Select the paper tray to be used ( AUTOMATIC , LOWER or UPPER ) using keys
5
or
6
+
Confirm your setting by pressing key OK
0DUJLQV
If you want to shift the side margins of your document to the left or to the right:
+
Adjust the left / right margin shift (in steps of 0.5 mm) by means the
5
or
6
keys
+
Press OK to confirm
2
7+(5

)81&7,216
/
2*6
The incoming and outgoing logs list the last 30 transmissions (incoming and outgoing) made by your
machine.
An automatic print out will take place after every 30 transmissions. However, you may request a print
out at any time.
Each log (incoming or outgoing) contains a table with the following information:
• date and time of the incoming or outgoing document
• subscriber’s number or E-mail address
• transmission mode (Norm, Fine, SFine or Photo)
• number of pages sent or received
• call duration
MFL 251 259 240A_MF34 Sagem Gb.book Page 12 Lundi, 24. mars 2003 2:50 14