TA Triumph-Adler 3005ci - Manual (Page 274)

6-22
Using Various Functions > Functions
Paper Output
Set paper output to document finisher or job separator tray.
* This cannot be selected when the optional 1,000-sheet finisher or 4,000-sheet finisher is installed.
Density
Adjust density using 7 or 13 levels.
Adjust density pressing [-3] (Lighter) to [+3] (Darker). You can change the density level
[-3] (Lighter) to [+3] (Darker) in half-steps.
Item Description
Inner Tray * Inner tray of the machine (where copies are stored)
Finisher Left Tray, Finisher Top Tray Tray of the optional 1,000-sheet finisher
Tray A, Tray B, Tray C Trays A to C in the optional 4,000-sheet finisher
Right Tray Optional right job separator
Job Separator* Optional inner job separator
Tray 1 to 7 Trays 1 to 7 in the optional mailbox (tray 1 is the top tray)
NOTE
• The setting for this function can be configured only when the optional job separator and/or document finisher
(1,000-sheet finisher or 4,000-sheet finisher) are installed.
• The default setting for Paper Output can be changed. For details, refer to Paper Output on page 8-16 .
• When [Heavy 3] (164 g/m
2
-) or higher is set in Paper Weight and Mailbox (Option) is set for the output destination,
the output destination is automatically changed to a tray that can be used.
Copy
Org./Paper/
Finishing
Custom
Box
Functions USB
Memory
Functions
Copy
Color/
Image Quality
Send
Color/
Image Quality
Custom
Box
Functions Color/
Image Quality
USB
Memory
Functions Color/
Image Quality