TA Triumph-Adler 3005ci - Manual (Page 67)

2-9
Installing and Setting up the Machine > Connecting Cables
Connecting USB Cable
1 Connect the machine.
1 Connect the USB cable to the USB interface connector (B1) located on the left side of the
body.
2 Connect the other end of the cable to the PC.
Connecting the Power Cable
Connect one end of the supplied power cable to the machine and the other end to a power outlet.
IMPORTANT
If the power is on, turn the main power switch off.
Power Off (page 2-11)
IMPORTANT
Only use the power cable that comes with the machine.