TA Triumph-Adler 3005ci - Manual (Page 481)

10-33
Troubleshooting > Troubleshooting
U
W
Y
Toner is empty.
[C][M][Y][K] — Replace the toner container to our
specified toner container.
NOTE
If the color toner is empty but the
black toner is remained, the
machine continues printing in black
and white by selecting [Print in
Black and White] of Color Toner
Empty Action.
page 10-6
Toner is low.
[C][M][Y][K](Replace
when empty.) — It is almost time to replace the toner
container. Obtain a new toner
container. —
Tray # is full of paper. Is the acceptable storage capacity
exceeded? Remove the paper. Printing then
resumes. —
Is the paper curled? Check the checkpoints of "Printouts
are curled." in Solving Malfunctions
and take the corrective actions. page 10-20
Message Checkpoints Corrective Actions
Reference
Page
Unknown toner installed. Is the installed toner container our
own brand?
We will not be liable for any damage
caused by the use of third party
supplies in this machine. —
Unknown Toner
Installed. PC [C][M][Y][K] Does the installed toner container's
regional specification match the
machine's? Install the specified container. —
Message Checkpoints Corrective Actions
Reference
Page
Warning for high
temperature. Adjust the
room temperature. ― Print quality may be deteriorated.
Adjust the temperature and the
humidity of your room. ―
Warning for low
temperature. Adjust the
room temperature. — Print quality may be deteriorated.
Adjust the temperature and the
humidity of your room. —
Warning low memory. — Cannot start the job. Try again later. —
Waste toner box almost
full. — It is almost time to replace the
waste toner box. Obtain a new
waste toner box. —
Message Checkpoints Corrective Actions
Reference
Page
You cannot use this box. — You cannot use the specified box.
Job is canceled. Press [End]. —
Message Checkpoints Corrective Actions
Reference
Page