TA Triumph-Adler 3005ci - Manual (Page 358)

8-12
Setup and Registration (System Menu) > System Menu
* If you want to enable the changed defaults immediately, move to the function screen and press the [ Reset ] key.
Paper Source for Cover Select the paper source in which the cover paper used for the Cover function is placed.*
Value : Cassette 1 to 7, Multi Purpose Tray
NOTE
[Cassette 3] to [Cassette 7] are displayed when the following options are installed.
[Cassette 3]: When a paper feeder (500-sheet x 2) or large capacity paper feeder (1,500-
sheet x 2) is installed
[Cassette 4]: When a paper feeder (500-sheet x 2) or large capacity paper feeder (1,500-
sheet x 2) is installed
[Cassette 5]: When a side feeder (3,000-sheet), side feeder (500-sheet x 3), or large capacity
side feeder (500, 1,500-sheet x 2) is installed
[Cassette 6]: When a side feeder (500-sheet x 3) or large capacity side feeder (500, 1,500-
sheet x 2) is installed
[Cassette 7]: When a side feeder (500-sheet x 3) or large capacity side feeder (500, 1,500-
sheet x 2) is installed
Special Paper Action When printing on Prepunched, Preprint, and Letterhead, punch-holes might not be aligned or
the print direction might be upside-down depending on how originals are set and the
combination of copying functions. In such a case, select [Adjust Print Direction] to adjust the
print direction. When paper orientation is not important, select [Speed Priority].
If [Adjust Print Direction] is selected, load paper according to the steps below.
Example: copying on Letterhead
Value : Adjust Print Direction, Speed Priority
Item Description
MP Tray Cassette Finishing Paper Original
MP Tray Cassette Finishing Paper Original