Enterasys Networks Security Router X-PeditionTM - Manual (Page 217)

FRF.12 Fragmentation
XSR User’s Guide 9-9
until you enter the copy running config startup config command to copy the running
configuration into the startup configuration file within Flash.
Map-Class Configuration
The Map Class configures a common profile (characteristics) that can be applied to PVCs, eliminating
the need to configure parameters on all individual PVCs. The
map-class frame-relay command
configures a FR map class.
Show Running Configuration
The show running-configuration command displays the running configuration on the screen.
Displaying Statistics
The following show commands display Frame Relay statistics:
• show frame-relay lmi — displays global or interface LMI counters.
• show frame-relay map — displays DLCIs and remote nodes’ IP addresses discovered by
Inverse ARP.
• show frame-relay traffic — displays Inverse ARP traffic statistics.
• show frame-relay pvc — displays global or per interface, sub-interface or DLCI data.
• show fragment — displays fragmentation information in a summary or detailed format.
• show map-class — displays class information for all configured map-classes as well as the
interfaces which are registered with them.
Reports and Alarms
The FR-related alarms are described in Appendix A: “Alarms/Events, System Limits, and
Standard ASCII Table” on page A-1.
Clear Statistics
When it becomes necessary, you can strip the Inverse ARP Table and other tables of FR statistics
with the
clear frame-relay inarp and clear frame-relay counter commands. The clear
frame-relay inarp command deletes particular or global FR port data and the clear frame-
relay counter command deletes specific or global DLCI or FR port data.
Note: Only those parameters different than default values are displayed.