Etsysvpnikepeer table, Etsysvpnikepeerproposals table – Enterasys Networks Security Router X-PeditionTM User Manual

Page 455

Advertising
background image

VPN MIB Tables

XSR User’s Guide B-13

etsysVpnIpsecProposalTable

etsysVpnIpsecPropTransformsTable

etsysVpnAhTransformTable

etsysVpnEspTransformTable

etsysVpnIpcompTransformTable

ospfIfTable

rip2IfConfTable

ipCidrRouteTable for Static Routes

etsysVpnIkePeer Table

This table is used to configure an IKE peer and the associated parameters of that peer. The table
index is {etsysVpnIkePeerAddrType, etsyVpnIkePeerAddress}.

etsysVpnIkePeerProposals Table

This table links IKE proposals in the etsysVpnIkeProposalTable with IKE peers in the
etsysVpnIkePeerTable. The XSR implementation permits a maximum of three proposals and
priority values 1, 2, or 3 only. Be aware that the lower priority row must exist before a higher
priority proposal can be created, that is, if no priority row equals 1, then priority rows 2 and 3
cannot be created. Also, a proposal in the etsysVpnIkeProposalTable must exist before the
corresponding row can be created in this table. The table index is {etsysVpnIkePeerAddrType,
etsysVpnIkePeerAddress, etsysVpnIkePeerPropPriority}.

Table B-30 etsysVpnIkePeerTable

Field

Description

etsysVpnIkePeerAddrType

This InetAddressType object is required for future compatibility with
IPv6. For the XSR, this can currently be set to IPv4 only.

etsysVpnIkePeerAddress

Since address type is IPv4, this is always a 4-octet IP address.

etsysVpnIkePeerAddrMask

Since address type is IPv4, this is always a 4-octet IP address mask.

etsysVpnIkePeerExchangeMode

Acceptable values are mainMode(2) and aggressive(4). When used to
create a row, all other values are defaulted.

etsysVpnIkePeerConfigMode

When used to create a row, all other values are defaulted.

etsysVpnIkePeerNatTraversal

When used to create a row, all other values are defaulted.

etsysVpnIkePeerIdentity

When used to create a row, all other values are defaulted.

etsysVpnIkePeerRowStatus

Acceptable values are active(1), createAndGo(4) and destroy(6).
When used to create a row, all values are defaulted.

Table B-31 etsysVpnIkePeerProposalsTable

Field

Description

etsysVpnIkePeerPropPriority

An index value for the proposal.

Advertising