Configuration for frame relay encapsulation, Configuration for frame relay encapsulation -41, Refer to – Enterasys Networks Security Router X-PeditionTM User Manual
Page 263: Configuration for frame relay, Encapsulation
Advertising
Backup Configuration
XSR User’s Guide 10-41
Configuration for Frame Relay Encapsulation
This backup dial-out example configures FR encapsulation and typical call parameters (dial pool,
dial string, dial class) on parent Dialer interface 20 while setting the DLCI and IP address on
Dialer sub-interface 20.1:
XSR(config)#interface dialer 20
XSR(config-if<D20>)#dial pool 3
XSR(config-if<D20>)#dial string 9053617921 class ISDN
XSR(config-if<D20>)#encapsulation frame-relay
XSR(config-if<D20>)#frame-relay lmi-type none
XSR(config-if<D20>)#no shutdown
XSR(config-if<D20>)#interface dialer 20.1 point-to-point
XSR(config-if<D20.1>)#ip address 192.168.20.1 255.255.255.0
XSR(config-if<D20.1>)#frame-relay interface-dlci 16
XSR(config-if<D20.1>)#no shutdown
Advertising