Using the cli for downloads, Using snmp for downloads, Fault reporting – Enterasys Networks Security Router X-PeditionTM User Manual

Page 82: Auto-discovery, Fault reporting -46 auto-discovery -46

Advertising
background image

Network Management Tools

2-46 Managing the XSR

Using the CLI for Downloads

TFTP can be used to transfer system firmware to the XSR remotely. A TFTP server must be
running on the remote machine and the firmware image file must reside in the TFTP root
directory of the server when using the

copy tftp

filename

command.

Using SNMP for Downloads

You can use an SNMP manager to download or upload firmware from a remote server, and copy
a configuration image file to the XSR. Only run-time/online mode downloads are supported. This
requires setting the ctDLNetAddress and ctDLFileName objects and issuing a ctDLOnLineDownLoad
defined in the CTRON-DOWNLOAD-MIB. For more details click on the following URL:

http://www.enterasys.com/support/mibs

Fault Reporting

A fault report can be uploaded through TFTP. The mechanism to upload the crash report is the
same as the one used to upload configuration file. Refer to

“Performing Fault Management”

on

page 2-23 for more information.

Auto-discovery

The NetSight Gateway Management Tool can auto-discover an XSR on the network using SNMP
with the following MIB variables:

SysDesr

SysObjID

Sysuptime

NetSight also performs auto-discovery via ping using ICMP ping.

Advertising