Enterasys Networks Security Router X-PeditionTM - Manual (Page 429)

System Alarms and Events
XSR User’s Guide A-7
CLI User: <username> logged in from
address <IP address> Login process failure due to invalid user ID or password
through telnet session in CheckLogin().
CLI User: <username> logged in from
console Login process failure due to invalid user ID or password
through console session in CheckLogin().
CLI Failed to create CLI session Insufficient memory at this time for data allocation.
CLI User: <username> failed to log in from
address <IP address> The user tries to login to administrator-reserved session
through Telnet and fails due to invalid login ID in
IsUserAdmin().
CLI Cannot open startup.cfg file! It may have
not been generated yet. The user cannot open the startup-config file in
RestoreRunningConfig( ).
CLI Could not seek to the end of startup.cfg
file! Startup.cfg not restored! Could not move to the end of the startup-config file in
RestoreRunningConfig().
CLI Could not get the size of startup.cfg file!
Startup.cfg not restored! The size of the startup-config file could not be obtained in
RestoreRunningConfig().
CLI Could not go to beginning of startup.cfg
file! Startup.cfg not restored! In RestoreRunningConfig()
CLI Could not allocate memory for startup.cfg
file! Startup.cfg not restored! Out of memory in RestoreRunningConfig() during boot process.
CLI Could not read startup.cfg! Startup.cfg not
restored! Failure reading startup-config during the boot process.
CLI Startup-config error at line <line number> Startup-config encountered an error at the specified line in the
configuration file.
CLI Running configuration can not be restored
successfully! Failure to restore configuration during boot process.
CLI Failed to read CLI configuration files Failure during boot process.
CLI Line <line #> too long in config file
<configuration file name> Skipping rest of
file… The specific line from startup-config file is too long to be processed
during bootup.
CLI CLI config mode released by user
<username> An unknown user exits configuration mode.
CLI CLI Config mode locked by user
<username> Another user has accessed configuration mode and you are trying to
access it.
CLI CLI Config mode locked by startup-config Configuration mode is locked when the startup-config script finishes
execution.
CLI CLI Config mode released by user
<username> A user exits Configuration mode.
CLI Cannot delete the Admin Occurs when you try to delete the administrator account.
ASYNC_
IDRIV The ISR could not be connected The driver failed to connect the ISR to the BSP, so it will note start.
ASYNC_
IDRIV Init string parse failure The driver could not parse the initialization string so it will not start.
Table A-6 High Severity Alarms/Events (continued)
Module Message Description