Amprobe ACDC-620T Clamp-On-Multimeter User Manual
Page 19
POWER-ON OPTIONS
c
SELECTING POWER-ON OPTIONS
Some options can only be selected when you turn the meter on. These power-on
options are listed in Table 2.
To select power-on press and hold the appriopriate pushbutton while turning the
rotary switch to any ON position. Power-on optons remain selected until the
meter is turned off.
18
PUSH
BUTTON
OPTIONDESCRIPTION
Turns off all beeper functions.
●
)
)
)
❍
∆
T
DH
❍
MAX
●
MIN
Demonstrate Annunciators
To demonstrate the annunciators. to demonstrate all annunciators.
momentarily press any button to exit the demonstration mod.
Disable auto-power off
In general, the auto-power off function turns the meter off if neither
rotary switch nor push button is activated for 15 minutes. You can dis-
able auto-power off function by this option. When auto-power off is dis-
abled the meter will stay in on continuously. Auto-power off is auto dis-
able in Dynamic Recording.
Enable "Refresh data Hold".
Table 2. Power-ON Options