Amprobe ACDC-620T Clamp-On-Multimeter User Manual
Page 29
Advertising
3) If the reading is " OL", then you can push RANGE button momentarily to change
measuring range and restart the PEAK+ measurement after setting the peak
mode.
4) Press
●
)
)
)
button to re-set the I ms peak hold again after setting peak mode.
Note: Acrest factor of 1.4 indicates a sinusoidal waveform.
Figure 16. 1ms Peak Hold Display.
Press and Hold
1 second
Press Peak
and 1 second
Hold
V
V
V
DH MAX
I
IIIl
I
28
Advertising