Amprobe ACDC-620T Clamp-On-Multimeter User Manual
Page 27
Advertising
c
CONTINUITY FUNCTION FOR OHMS MEASUREMENT
To enable the continuity function, set the meter to the
Ω
range.
Press
●
)
)
)
button momentarily to toggle the CONTINUITYfunction ON/OFF.
The continuity range is 0-400.0
Ω
and the beeper will sound if the resistance is less
than 10.0
Ω
. If another range is selected, the unit will beep if the value displayed is
less than 100 counts. Momentarily pushing this button again will toggle the beeper
and annunciator on or off.
Figure 12. Demostrate Annunciator.
26
Advertising