Amprobe ACDC-620T Clamp-On-Multimeter - Manual (Page 25)

Figura 10. Analog Bar graph
c AUTO POWER OFFAND SLEEPMODE
There are two modes for power saving.
1 ) The instrument will enter the "sleep" mode within 15 minutes, unless:
1-1. Any push buttons have been pressed
1-2. The rotary switch has been changed to another function
1-3. The unit has been set to Dynamic recording mode
1-4. The unit has been set to I ms PEAK hold mode.
1-5. The auto power off has been disabled with powerup option
2) In the sleep mode, the LCD will display a blinking
"@OFF . . . "annunciator.
2-1. To wake-up sleep mode, press any push button for 0.5 sec or rotate rotary
switch.
2-2. Without wake-up, after 15 minutes, the meter will automatically shut off com
pletely.
3) You must turn the rotary switch to the OFF position, then turn it back to a func
tion to activate the meter after an auto power off.
24