Amprobe ACDC-620T Clamp-On-Multimeter - Manual (Page 51)

RANG Resolution Accuracy *V Maximum
-40°C ~1372°C 1°C
-40°F ~ 2502°F 1°F
±(0,5%rdg+3°C)
±(0,5%rdg+6°F)
30 V RMS
or 60 V DC
c K-TYPETEMPERATUREMEASUREMENTRANGE
Gama Resolución Precisión *V Máximo
-50°C<
∆
T<100°C 1°C
-58°F<
∆
T<180°F 1°F
±(0,5%rdg+3°F)
±(0,5%rdg+6°F)
30 V RMS
or 60 V DC
c TEMPERATURADIFERENCIALTIPO K
RANGE Resolution Accuracy Overload Protection
400
µ
F 0.1
µ
F
400
µ
F 1
µ
F
±(3%rdg+4dgt)
±(3.5%rdg+4dgt),
>2mF, NO Spec
600 V
RMS
c CAPACITANCE
Note: Do not alow the temperature sensor to contact a surfece which is energized above
30 V RMS or 60 V DC, such voltages pose a shock hazard.
● The T1 input must be greater than -T2 input for T1-T2 measuring.
● the accuracy does not include the tolerance of thermocouple probe.
● MODELTPK-56, BEADTYPE-K THERMOCOUPLE (optional)
Temperature Rating (wire): continuous 204°C, 260°C (intermittent)
Temperature measuring Range (bead): -50
o C to +800°C (MAX) Accuracy.
±2.2°C or ±0.75% of reading from 0°C to 800°C (whichever is greater)
±2.2°C or ±2% of reading from 0°C to -50
o C (whichever is greater)
Caution: The bead end can be touched to surfacve temperatures above 204 0 C
for very short durations. However, wire insulation or wire may be damage if wire
subjected to the same temperature.
● With film capacitor or better, use ZERO to cancel residual.
● Temperature coefficient: 0.15 x specified accuracy / °C(from 18 o C or 28 o C to 50 o C) or 0.084 x
specified accuracy/ o F(from 32 o F to 64.4 o F or 82.4 o F to 122 o F)
50