Amprobe – Amprobe DMIII-Multitest Power-Quality-Recorder User Manual
Page 33
AMPROBE
DMIII MULTITEST
EN-31
At the end of the test
the instrument emits a
double beep indicating
that
the
test
is
correctly
terminated
and displays the values
to the right.
EARTH
05.06.01
Ground
Resistance
value
expressed in
.
0.77
Vd= 1V
Test:04
RAVG=0.74
3-W
Voltage value of electrical
noise
Number of Test
Average Value of Ground
Resistance calculated over
the
Number
of
Test
displayed.
FUNC CLR
"3 Point" Working mode
4. The instrument will show automatically the average value of the Ground resistance
calculate over the tests performed. Press F2 to RESET this value and the number of
Test.
This result can be stored by pressing the SAVE key twice (refer to paragraph 9.1).