Avago Technologies LSI20160 User Manual
Avago Technologies Hardware
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- PCI Storage Device Management System SDMS™ 4.0
- Chapter1 Using the SDMS Software
- Chapter2 SCSI BIOS and Configuration Utility
- 2.1 Introduction
- 2.2 Boot Initialization with BBS
- 2.3 Using the SCSI BIOS Configuration Utility
- 2.4 Starting the SCSI BIOS Configuration Utility
- 2.5 Exiting the SCSI BIOS Configuration Utility
- Chapter3 Windows 95, Windows 98, Windows Me Device Driver Installation
- Chapter4 Windows NT 4.0 Device Driver Installation
- 4.1 Introduction
- 4.2 Using the SDMS Windows NT Drivers
- 4.3 Installing Drivers for Windows NT
- 4.4 Performance Tuning for Windows NT 4.0
- 4.5 Troubleshooting
- 4.6 Using the NT Configuration Utility
- 4.6.1 Installing the NT Configuration Utility (x86 Platforms)
- 4.6.2 Starting the NT Configuration Utility
- Figure4.2 NT Configuration Main Menu
- Table 4.1 Main Menu Bar and Footer
- Table 4.2 Main Menu Fields and Descriptions
- Figure4.3 Adapter Settings Menu
- Table 4.3 Adapter Properties Fields and Descriptions
- Figure4.4 Device Selections Menu
- Table 4.4 Device Selections Fields and Descriptions
- Figure4.5 Domain Validation Menu
- Figure4.6 Test Selections Menu
- Table 4.5 Adjustments Fields and Descriptions
- Table 4.6 Test Procedures Fields and Descriptions
- 4.6.3 Exiting the NT Configuration Utility
- 4.7 Using the Domain Validation Utility
- 4.8 Using SDMS ASPI for Windows NT 4.0
- 4.9 Using SCSI Tools for Windows NT
- Chapter5 Windows 2000 Device Driver Installation
- Chapter6 DOS Device Driver Installation
- Chapter7 OS/2 Device Driver Installation
- Chapter8 SCO OpenServer 5 Device Driver Installation
- Chapter9 UnixWare 7 Device Driver Installation
- Chapter10 Solaris Device Driver Installation
- Chapter11 Linux Device Driver Installation
- Chapter12 NetWare Device Driver Installation
- AppendixA Glossary of Terms and Abbreviations
- Customer Feedback