Avago Technologies LSI20160 - Manual (Page 43)

Starting the SCSI BIOS Configuration Utility 2-19
Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.
Table 2.5 lists the fields on this menu and their descriptions.
Table 2.5 Boot Adapter List Menu Fields and Descriptions
Field Field Type
[Value] Description
Adapter Information Indicates the specific LSI Logic family of host adapters.
PCI Bus Information Indicates the PCI bus number (range 0x00–0xFF, 0–255 decimal)
assigned by the system BIOS to an adapter.
Dev/Func Information Indicates the PCI Device/Function assigned by the system BIOS to an
adapter.
An 8-bit value is mapped as follows:
Bit # 7 6 5 4 3 2 1 0
Bits [7:3]: Device (range 0x00–0x1F, 0–31 decimal)
Bits [2:0]: Function (range 0–7)
Boot Order Configuration
[0 to 3] Indicates the relative boot order (0 to 3) of the listed adapter. The SDMS
SCSI BIOS traverses up to four adapters in the specified order in search
of bootable media.
Current
Status Information Indicates whether an adapter in the boot list was enabled during the most
recent boot. The SDMS SCSI BIOS ignores disabled adapters and their
attached devices, although they are still visible to the configuration utility.
Next Boot Configuration
[On/Off] Indicates whether to enable an adapter upon the next boot. The SDMS
SCSI BIOS ignores disabled adapters and their attached devices
although they are still visible to the configuration utility.