5 troubleshooting, Troubleshooting – Avago Technologies LSI20160 User Manual

Page 137

Advertising
background image

About the ASPI8XX.SYS Driver

6-11

Copyright © 1993–2001 by LSI Logic Corporation. All rights reserved.

6.3.5 Troubleshooting

Some potential problems and their suggested solutions are:

System locks up at boot time.

•

Check for conflicts with other ASPI managers.

•

Check for correct loading sequence in the

CONFIG.SYS

file.

•

Reboot the system.

The device driver does not recognize one of the nonboot SCSI
peripherals (system may lock up).

•

Make sure the drivers were installed in the correct sequence.

•

Make sure the drivers’ entries in the

CONFIG.SYS

file have the correct

path to the drivers.

•

Power down all units in the system.

•

Make sure all SCSI devices have unique ID numbers.

•

Make sure both ends of the SCSI bus are terminated.

•

Check all cable and power connections.

•

Reboot the system.

/VERBOSE
or
/V

Causes more detailed information to appear on the monitor, after the

ASPI8XX.SYS

driver is initialized, during a system boot. For example, the following information may
be displayed (all on one line) after using the

/VERBOSE

or

/V

option:

53C875 Rev 3 at PCI ID 15, Bus 0, Dev/Func 70h, CMD=0117h,
SCRIPTS=FFFBE000h

This option is useful when multiple adapters are present in the system, and the PCI
Device ID, the PCI Bus number, and the PCI Device/Function number for each
adapter needs to be known. This information is required to use the

/EXCLUDE

option

already described in this section.

Syntax:

/VERBOSE

To see more detailed adapter information displayed when you boot, the line in the

CONFIG.SYS

file that loads

ASPI8XX.SYS

should look like this:

DEVICE=C:[PATH]ASPI8XX.SYS /VERBOSE

Table 6.1

ASPI8XX Command Line Options (Cont.)

Option Name

Description

Advertising
This manual is related to the following products: