PLANET FGSW-4840S - Manual (Page 26)

User’s Manual of FGSW-4840S
22
3.7.1 Port VLAN Setting
The page displays when the switch is in Port VLAN mode, the screen in Figure 3-24 appears.it contains the following fields:
Figure 3-24 Port VLAN Setting screen
Object Description
VLAN The VLAN number. Select the number of the VLAN you want to configure here.
Port The switch port number.
Member Select the member of the VLAN here. If this field is checked, it indicates the port belongs to the
current VLAN.
Member Description Displays the user-defined port description.
ALL VLAN Displays all defined VLANs.
Select All Select all ports to be the VLAN members.
Clean Up Clean up all members of the VLAN.
Submit Submit to buildup a VLAN with the selected members.
#
Note :
1. If any Trunk has been set, the Trunk can be configured as a VLAN member and member
ports of the Trunk is not able to be configured.
2. For the first time the Port VLAN mode is set, a default VLAN, which is indexed as NO.1
and contains all switch ports.