PLANET FGSW-4840S - Manual (Page 28)

User’s Manual of FGSW-4840S
24
The Tag VLAN setting page is affected by the global setting of the ports, the screen in Figure 3-26 appears. It contains the
following fields:
Figure 3-26 Tag VLAN Setting screen
#
Note :
If any Trunk has been set, the Trunk can be configured, but member ports of the Trunk is not
able to be configured and in the field it display the parameters of the Trunk they belong to.
Object Description
VLAN The VLAN number. Select the number of the VLAN you want to configure here.
VLAN ID Configure the VLAN ID.
Port The switch port number.
Member Select the member of the VLAN here. If this field is checked, it indicates the port belongs to the
current VLAN.
Egress Frame The solution to the egress frame. “Drop Tag" indicates drop the tag header before sending the frame.
“Add Tag" indicates add the tag header before sending the frame. "Unmodify" indicates do not
modify the tag header before sending the frame.
All Ports By operating on this field expediently, you can set the values of all ports in the corresponding field.
ALL VLAN Displays all defined VLANs.
Select All Select all ports to be the VLAN members.
Clean Up Clean up all members of the VLAN.
Submit Submit to buildup a VLAN with the selected members.