PLANET BSP-300 User Manual
Page 10
Advertising
10
Step 5. Connect other device
Ethernet Extender
DC
1
2
(1) Connect any other network device to Port 3 of BSP-300.
(2) If there is device require DC power, connect the pin 3 / pin 4 of the terminal
block from BSP-300 directly.
Note
The maximum DC out from BSP-300 is 24VDC, 2A.
l
The external device should also be grounded properly.
l
After the 5 steps above, the BSP-300 is ready for service.
Advertising