PLANET BSP-300 User Manual
Page 9
Advertising
9
Step 4. Connect 8023af / 802.3at PoE Device
802.3af/at PoE Device
PoE
PoE
1
2
(1) Connect the PoE devices to Port 1 / Port 2 of the BSP-300.
(2) Check the PoE In-Use LED, if the network devices such as PoE Camera, PoE
Wireless AP is powered, the PoE In-Use LED will turns ON and Link/Act LED
will turns on or blinking for a success connection or data receiving.
Note
Please use Cat. 5/5e or above cable and the maximum distance
l
should within 100 meters.
If the Network devices are installed outdoor, please consider to
l
install a lightening arrestor to protect the network device and
BSP-300.
Advertising