PLANET ICA-8350 - Manual (Page 19)

3Mega-Pixel Vandal Proof Fish-Eye IP Camera
ICA-8350
2.2. Hardware Installation
2.2.1. Physical Installation
1. Use the provided L-wrench; loosen the tamper-resistant housing cover (with screws
still attached on the cover). The unit has a factory installed side conduit entry and one
may adjust the cables to back conduit entry according to installation requirement.
2. Set the mounting base onto the wall or ceiling and center it over the mounting hole, using the
supplied three retaining screws to secure the main body.
3. Set the proper image by rotating the camera body and set the focus by turning the lens
to the left or right direction. You can connect video output cable (BNC) to a TV monitor.
Once the picture appeared on the monitor, and then adjusts the focus of the lens to
obtain the best clear picture.
4. When the camera focus adjustment has been completed, use the provided L-wrench to
fasten the tamper-resistant housing to the main body.
19