Upnp – PLANET ICA-8350 User Manual

Page 47

Advertising
background image

3Mega-Pixel Vandal Proof Fish-Eye IP Camera

ICA-8350

47

6.1.7. UPnP

UPnP is short for Universal Plug and Play, which is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. This device is an UPnP
enabled Internet Camera. If your operating system is UPnP enabled, the device will automatically
be detected and a new icon will be added to “My Network Places.” If you do not want to use the
UPnP functionality, it can be disabled

In addition, this device also provides UPnP IGD function for NAT traversal easily. Use NAT
traversal when your device is located on an intranet (LAN) and you wish to make it available from
the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to
an external HTTP port in the NAT router will be forwarded to the device.

UPnP

To enable or disable the UPnP service here.

Shows the friendly name of this device here.

Friendly Name

When enabled, the device will attempt to configure port mapping in
a NAT router on your network, using UPnP™. Note that UPnP™
must be enabled in the NAT router first.

UPnP NAT Traversal

The port range will open in NAT router.

Port Range

Show the IP address and port for WAN access through Internet. If
NAT traversal is configured successfully, user can use this IP
address and port to access this device.

External IP address

Advertising
This manual is related to the following products: