PLANET IPOE-E174 - Manual (Page 18)

18
Step 3: Once the IPOE-E174 detects the existence of an IEEE
802.3at/af device, the “PoE In-Use” LED indicator will be lit
steadily, showing it is providing power.
Ultra PoE/60W
IEEE 802.3at/25W
IEEE 802.3at/25W
PoE PTZ IP Cemera
Ultra PoE/60W
IEEE 802.3af/12W
IEEE 802.3af/12W
IEEE 802.3af/12W
IEEE 802.3af/12W
PoE Dome IP Camera
Power
Data
Power
Data
Note
1. If the connected device is not fully complying with
IEEE 802.3af/at standard or in-line power device, the
PoE In-Use LED indicator of the IPOE-E174 will not be
lit steadily.
2. According to IEEE 802.3af/at standard, the IPOE-E174
will not inject power to the cable if not connecting to
a standard IEEE 802.3af/at device.
3. DONOT connect any PSE to port 1 ~ port 4 of the
IPOE-E174, it may damage the device permanently.