PLANET WAP-6100 - Manual (Page 19)

4.1.5 IP Settings
This page can configure system IP address. Default IP address is 192.168.1.1 and Subnet Mask is
255.255.255.0. You can manually input IP address setting or get an IP from a DHCP server.
IP Network Setting Here you can choose to get IP from a DHCP server or specify IP address
manually. Choose to obtain an IP address from DHCP server if your
environment or ISP provide DHCP server. Otherwise, you must manually setup
IP address.
IP Address If you select “Specify an IP address”, you must enter a unique IP address here.
IP Subnet Mask The Subnet Mask must be the same as your Ethernet network setting.
Default Gateway Enter the IP address of your gateway here. If your network does not have a
Gateway, you can leave this field blank.
4.1.6 Wireless Network